TURNTABLE LAB

Akai
Power Supply For MPD-16

Replacement power supply for Akai MPD-16 controller.
reviewed by the mgmnt

file under:
akai parts / replacement parts

go to detail page | close window

Audio Innovate
InnoFader Non-Contact Crossfader

high quality, fits most mixers

After studying the habits and requirements of today's DJs, Audio Innovate has developed a next generation cross fader that is designed to take fader standards to whole new level. The all-new "Innofader" is by far the most advanced fader on the market today and will suit the ever growing needs of all levels of DJs and turntablists by offering unparalleled levels of quality and adjustability that you cannot find in other faders. The Innofader features all new capacitance (non-contact) technology which means super long life, ultra low maintenance and no bleeding or cracking. With this non-contact technology so you can rest assured it will last and perform smoothly in even the harshest DJ environments. In addition, the Innofader comes with full on-board cut-in and curve control and tension adjustment so you can tweak and adjust the fader to your personal preference (even on mixers that may not have these features). The Innofader is very well constructed and features a solid steel 8mm fader stem (to withstand the punishment of heavy handed scratchers), and specially designed polished rails to ensure butter smooth performance. All this AND it fits in the widest range of VCA mixers for a crossfader. Several adaptor boards, plates, screws and washers are included (as well as a special mini-screwdriver keychain) to ensure the Innofader will fit properly. So you can simply plug and play. So even if you have an old budget mixer or maybe a more advanced mixer, the Innofader is a very welcome upgrade. Recommended.

list of compatible mixers

reference video for installing the innofader
reviewed by the mgmnt

file under:
audio innovate parts / replacement parts / audio innovate - mixers

go to detail page | close window

Audio Innovate
Rane TTM-56/57 Adaptor Kit for Innofader

Custom adaptor kit to fit the Audio Innovate Innofader into a Rane TTM-56S or 57. Includes fader knob, plate, board and screws. FADER NOT INCLUDED.
reviewed by the mgmnt

file under:
audio innovate parts / replacement parts / audio innovate - mixers

go to detail page | close window

Audio-Technica
AT92E Universal Mount Phono Cartridge

Finally, a universal replacement cartridge for most turntables (especially older models and turntables that came with older stereo systems). The AT92E is a basic stereo phono cartridge that is both headshell mountable and P-mountable. It features a full range of frequency response (15 - 27,000hz) and a special elliptical diamond stylus tip for lower distortion and a cleaner, more lifelike sound. Comes with all the screws and hardware necessary for mounting. Scratching or back cueing with this cartridge is NOT recommended.

Fits turntables from the following manufacturers:
Acutex
ADC
AKG
Astatic
Aiwa
Azden
BSR
Denon
Dual
Empire
Fisher
Gerrard
Grado
Kenwood
Harman KArdon
Hitachi
JVC
Marantz
MCS
Mitsubishi
NAD
Onkyo
Ortofon
Panasonic
Radio Shack
Sanyo
Sansui
Scott
Sharp
Sherwood
Shure
Sony
Stanton
Technics
Toshiba
Yamaha
reviewed by the mgmnt

file under:
audio-technica parts / replacement parts / audio-technica - cartridges / listening + recording cartridges / and more

go to detail page | close window

Audio-Technica
ATN3600L Replacement Stylus for AT-PL50, AT-LP2DUSB

Fits the Audio-Technica AT-PL50 turntable.
reviewed by the mgmnt

file under:
audio-technica parts / replacement parts / audio-technica - cartridges / replacement styli / and more

go to detail page | close window

Eclectic Breaks
Pro X Fade Crossfader

Frustrated with the products being offered on the market, professional DJ company, Eclectic Breaks, has developed what it believes is the world's most advanced 'DJ friendly' analogue crossfader. Not only does the retrofitting EB Pro-X-Fade crossfader utilise 100% conductive plastic tracks for longer fader life, it allows DJ's to physically change the feel of the fader to suit their particular needs. By employing the easily accessible cut-in rotaries, the DJ can also alter the cut-in point to provide an instant on/off switch feel, or gradual volume increase mode. In addition, by utilising the correct connectors and faceplate, DJ's can now interface with numerous analogue and digital mixer architectures from the most popular manufacturers. Highly distinguishable, the EB Pro-X-Fade benefits from a wider stem to prevent breakage during use or while in transit. Fully endorsed and supported by a substantial number of champion DJ's and venues around the world, the EB Pro-X-Fade has been designed to allow easy access for lubricating and cleaning the fader-pole. With this in mind all crossfaders are supplied with industry standard lubrication oils and adjustment tools to keep them in perfect condition.
reviewed by the mgmnt

file under:
vestax - replacement parts / stanton - replacement parts / replacement parts / dj accessories / and more

go to detail page | close window

Ecler
Eternal Crossfader

The famous long-life, high quality HAK 360 crossfader. These feature a very similar feel & performance to Rane's TTM-56 crossfader, and come with a 5 YEAR warranty- unheard of for a crossfader. Fits Ecler HAK-360, NUO-3, NUO-4, & NUO-5 only.
reviewed by the mgmnt

file under:
ecler - replacement parts / replacement parts / ecler - mixers

go to detail page | close window

Ecler
FAHAK 30 Replacement Fader

45mm replacement fader. Fits Ecler HAK-310 crossfader + upfader; HAK-360 upfader.
reviewed by the mgmnt

file under:
ecler - replacement parts / replacement parts / ecler - mixers

go to detail page | close window

Ecler
Line Switch for HAK series

Replacement line switch (transformer) for all Ecler HAK series mixers.
reviewed by the mgmnt

file under:
ecler - replacement parts / replacement parts / ecler - mixers

go to detail page | close window

Lacie
Power Supply for Lacie USB Speakers

This power supply allows you to use Lacie USB speakers without plugging into your computer; just plug your iPod or MP3 player directly into the speakers (using a standard stereo cable). In addition, the power adaptor increases the wattage of the speaker for louder sound.
reviewed by mgmnt

file under:
monitors + speakers / replacement parts

go to detail page | close window

M-Audio
Torq Replacement Control Vinyl - Black

(1) controller vinyl for use with M-Audio's Torq.
reviewed by the mgmnt

file under:
m-audio - torq digital djing / m-audio parts / replacement parts / accessories - digital djing / and more

go to detail page | close window

M-Audio
Torq Replacement Control Vinyl - Clear

(1) controller vinyl for use with M-Audio's Torq, now in clear vinyl.
reviewed by the mgmnt

file under:
m-audio - torq digital djing / m-audio parts / replacement parts / accessories - digital djing / and more

go to detail page | close window

M-Audio
Torq Replacement Control Vinyl - Ghost

(1) controller vinyl for use with M-Audio's Torq, now in white.
reviewed by the mgmnt

file under:
m-audio - torq digital djing / m-audio parts / replacement parts / accessories - digital djing / and more

go to detail page | close window

M-Audio
Torq Replacement Control Vinyl - Red

(1) controller vinyl for use with M-Audio's Torq, now in red vinyl.
reviewed by the mgmnt

file under:
m-audio - torq digital djing / m-audio parts / replacement parts / accessories - digital djing / and more

go to detail page | close window

Native Instruments
Multicore Cable (1 Replacement Cable)

Simplify the setup process of your digital DJ system. Native Instruments Multicore Cable is designed to make connecting digital DJ systems as simple as "one click per deck". The Multicore Cable ensures quick and easy connection between mixer, decks, and interface by clearly labeling and grouping all necessary cables and making them connect via one simple XLR connection. This greatly speeds up set up time at home or in the club, eases the changeover between DJs, and eliminates the headache of confusing cable hookup. This replacement set includes one "Mixer Segment" cable comprising of 4 male RCAs (for connecting phono and line-in plugs, plus 2 female RCAs for your turntable) and one "Audio 8 DJ Segment" which connects the "Mixer Segment" to your interface.

IMPORTANT NOTE: You need TWO (2) SETS of Multicore cable to fully set up your Traktor Scratch, Serato, or other digital DJ system.
reviewed by the mgmnt

file under:
native instruments parts / replacement parts / traktor pro - digital djing / accessories - digital djing / and more

go to detail page | close window

Native Instruments
Multicore Cable (2 Mixer Segments)

Two replacement Multicore mixer segments for use with Traktor Scratch. These "mixer segments" comprise of 4 male RCAs (for connecting phono and line-in plugs, plus 2 female RCAs for your turntable) and connect your turntables/CDJ's/mixer through an XLR jack that hooks up to your Audio 8/4/2 interface's "Audio DJ segments" (not included).

reviewed by the mgmnt

file under:
native instruments parts / replacement parts / traktor pro - digital djing / accessories - digital djing / and more

go to detail page | close window

Native Instruments
Traktor Scratch Control Vinyl - Black

Replacement control vinyl for use with Native Instrument's Traktor Skratch.
reviewed by mgmnt

file under:
native instruments parts / replacement parts / traktor pro - digital djing / accessories - digital djing / and more

go to detail page | close window

Native Instruments
Traktor Scratch Control Vinyl - White

Now in white. Replacement control vinyl for use with Native Instrument's Traktor Skratch.
reviewed by the mgmnt

file under:
native instruments parts / replacement parts / traktor pro - digital djing / accessories - digital djing / and more

go to detail page | close window

Native Instruments
Traktor Skratch Control Vinyl - Red

Cherry red version. Replacement control vinyl for use with Native Instrument's Traktor Skratch.
reviewed by the mgmnt

file under:
native instruments parts / replacement parts / traktor pro - digital djing / accessories - digital djing / and more

go to detail page | close window

Numark
CP-PRO Crossfader

Replacement crossfader for Numark PPD-01 znd all DXM series mixers.
reviewed by the mgmnt

file under:
numark - replacement parts / replacement parts

go to detail page | close window

Numark
Headshell

Fits most turntables with tonearms that accept screw-in headshells. This includes all Numark models, plus Technics SL-1200 models and turntables by Stanton, Vestax, etc.
reviewed by the mgmnt

file under:
numark - replacement parts / replacement parts / cartrdge accessories / and more

go to detail page | close window

Numark
Power Supply for SM, CM and EM Series Mixers

Fits all Numark SM, CM and EM series mixers.
reviewed by the mgmnt

file under:
numark - replacement parts / replacement parts

go to detail page | close window

Numark
PT01 + iPTUSB Power Supply

Replacement power supply that works with:
- Numark's PT-01 portable turntable
- Ion iPTUSB portable turntable
reviewed by the mgmnt

file under:
numark - replacement parts / replacement parts

go to detail page | close window

Numark
PT01 + iPTUSB Replacement Stylus

Replacement stylus for:
- Numark PT-01 portable turntable
- Ion iPTUSB portable turntable
reviewed by the mgmnt

file under:
numark - replacement parts / replacement parts / replacement styli / portable - turntables

go to detail page | close window

Numark
Straight Tonearm for TT-200

Easy self-installation. Fits Numark TT-200 turntable only. S shaped tonearm also available
reviewed by the mgmnt

file under:
numark - replacement parts / replacement parts

go to detail page | close window

Ortofon
Finger Lift Cover - Pair

Replacement finger lift cover for all Ortofon Concorde-style cartridges.
reviewed by the mgmnt

file under:
ortofon - replacement parts / replacement parts / cartrdge accessories / and more

go to detail page | close window

Ortofon
SH-4 Headshell - Black

Add some serious style to your deck with these sleek, metallic headshells from Ortofon. The SH-4 is a much better look than your standard black plastic headshell plus features a big finger lift, short head to make it easier to watch and place your stylus on the groove, and gold plated wire terminals for a better signal. Mounting screws included.
reviewed by the mgmnt

file under:
ortofon - replacement parts / replacement parts / cartrdge accessories / and more

go to detail page | close window

Ortofon
SH-4 Headshell - Blue

Add some serious style to your deck with these sleek, metallic headshells from Ortofon. The SH-4 is a much better look than your standard black plastic headshell plus features a big finger lift, short head to make it easier to watch and place your stylus on the groove, and gold plated wire terminals for a better signal. Mounting screws included.
reviewed by the mgmnt

file under:
ortofon - replacement parts / replacement parts / cartrdge accessories / and more

go to detail page | close window

Ortofon
SH-4 Headshell - Pink

Add some serious style to your deck with these sleek, metallic headshells from Ortofon. The SH-4 is a much better look than your standard black plastic headshell plus features a big finger lift, short head to make it easier to watch and place your stylus on the groove, and gold plated wire terminals for a better signal. Mounting screws included.
reviewed by the mgmnt

file under:
ortofon - replacement parts / replacement parts

go to detail page | close window

Ortofon
SH-4 Headshell - Silver

Add some serious style to your deck with these sleek, metallic headshells from Ortofon. The SH-4 is a much better look than your standard black plastic headshell plus features a big finger lift, short head to make it easier to watch and place your stylus on the groove, and gold plated wire terminals for a better signal. Mounting screws included.
reviewed by the mgmnt

file under:
ortofon - replacement parts / replacement parts / cartrdge accessories / and more

go to detail page | close window

Rane
Crossfader for TTM 54 + 52 mixers

Fits TTM-54/TTM-52 as crossfader or volume fader. Item does not include crossfader knob.
reviewed by the mgmnt

file under:
rane - replacement parts / replacement parts

go to detail page | close window

Rane
Crossfader for Z-series + XP2016

Fits all Z series mixers and the XP2016.
reviewed by the mgmnt

file under:
rane - replacement parts / replacement parts

go to detail page | close window

Rane
Crossfader Knob

Fits all current Rane mixers: TTM-54, TTM-56, TTM-57, Empath, XP2016a, MP2, MP4, MP44.
reviewed by the mgmnt

file under:
rane - replacement parts / replacement parts

go to detail page | close window

Rane
MFC1 Foam Mixer Cover for TTM57 / Empath

Easily protect the knobs, sliders, and face of your Rane TTM57 or Empath. This simple foam cover is an inexpensive way to protect your investment. The cover installs easily over your mixer with two velcro straps so you can put it in your backpack, suitcase, or bag without fear of damaging the controls on the way to your show.

The cover measures a thin 1" x 10.5" x 13.5" (2.6 x 26.7 x 34.3 cm) and weighs only 5.2 ounces (148 grams).
reviewed by the mgmnt

file under:
rane - replacement parts / replacement parts / record bags + equipment cases / serato - digital djing / and more

go to detail page | close window

Rane
Penny & Giles Crossfader for Empath Mixers

Fits all Empath mixers. Works as both the crossfader and volume fader.
reviewed by the mgmnt

file under:
rane - replacement parts / replacement parts

go to detail page | close window

Rane
Power Cord for Empath mixers

Fits all Rane Empath mixers.
reviewed by the mgmnt

file under:
rane - replacement parts / replacement parts

go to detail page | close window

Rane
Replacement Knob Extensions for Empath Mixers

Extends the Rane replacement knob to fit on Empath mixer EQ knobs.
reviewed by mgmnt

file under:
rane - replacement parts / replacement parts

go to detail page | close window

Rane
Replacement Knob for TTM Series Mixers

Fits Gain knobs for Rane TTM series mixers.
reviewed by the mgmnt

file under:
rane - replacement parts / replacement parts

go to detail page | close window

Rane
RS-1 Power Supply for TTM Series Mixers

Fits all Rane TTM series mixers.
reviewed by the mgmnt

file under:
rane - replacement parts / replacement parts

go to detail page | close window

Rane
RS-6 Universal Power Supply for Serato SL 3

power for SL 3 anywhere in the world

The RS 6 universal power supply only works with the Rane SL 3. The supply includes different input plugs for the USA, Europe, UK and Australia. The USA plug is attached at the factory - you may need to replace it in your country. To remove a plug, push the button while turning the outer rim counterclockwise. To attach a plug, rotate it to fit into the supply and turn clockwise until it locks in place. This power supply is regulated 7.5 volts DC, 1 amp, using a P6 type barrel plug.

NOTE: This supply does not work with the SL 1.
reviewed by the mgmnt

file under:
rane - replacement parts / replacement parts / serato - digital djing / accessories - digital djing / and more

go to detail page | close window

Rane
Serato Scratch Live Record - Black Vinyl

Second edition Serato record, for use with the Scratch Live program only.
reviewed by the mgmnt

file under:
rane - replacement parts / replacement parts / serato - digital djing / accessories - digital djing / and more

go to detail page | close window

Rane
Serato Scratch Live Record - Blue Vinyl

Colored replacement Serato record for use with the Scratch Live program only. Add some color to your setup. Cool, see-through blue.
reviewed by the mgmnt

file under:
rane - replacement parts / replacement parts / serato - digital djing / accessories - digital djing / and more

go to detail page | close window

Rane
Serato Scratch Live Record - Clear Vinyl

Clear replacement Serato record for use with the Scratch Live program only. Invisibles style.
reviewed by the mgmnt

file under:
rane - replacement parts / replacement parts / serato - digital djing / accessories - digital djing / and more

go to detail page | close window

Rane
Serato Scratch Live Record - Red Vinyl

Colored replacement Serato record for use with the Scratch Live program only. Add some color to your setup. Bright, see-through red.
reviewed by the mgmnt

file under:
rane - replacement parts / replacement parts / serato - digital djing / accessories - digital djing / and more

go to detail page | close window

Rane
Serato SL-1 Power Supply

This is not a Rane brand product, but it is fully compatible with the Rane Serato SL 1. It's a high grade power supply intended for usage with production equipment.

Any DJ that uses Serato when playing out, needs a back-up power supply. USB power can be unreliable and spotty at times, so this secondary power source is highly recommended. NOTE: Only works with the SL 1 interface.
reviewed by the mgmnt

file under:
rane - replacement parts / replacement parts / serato - digital djing / accessories - digital djing / and more

go to detail page | close window

Rane
Transform Switch for TTM Series Mixers

Fits Rane TTM54i and TTM56 only.
reviewed by the mgmnt

file under:
rane - replacement parts / replacement parts

go to detail page | close window

Shure
35 Series Cartridge Hardware Kit

For Shure's 35 series of cartidges (SC35C, M35X, M35S, etc). Includes: headshell wires, stylus brush, cartridge screws (2 lengths), spacers, washers, and weight.
reviewed by the mgmnt

file under:
shure - replacement parts / replacement parts / cartrdge accessories / and more

go to detail page | close window

Shure
44 Series Cartridge Hardware Kit

For Shure's 44 series (M447, M44G). Includes: screwdriver, headshell wires, stylus brush, cartridge screws (2 lengths), spacers, washers, and weight.
reviewed by the mgmnt

file under:
shure - replacement parts / replacement parts / cartrdge accessories / and more

go to detail page | close window

Shure
Large Flex Sleeves - 5 Pair (EA710L)

These reusable sleeves fit comfortably in the ear and allow for ease of insertion. Fits all E3, E4, E5, I3, I4, and I5 series earphones. 5 Pairs (10 total).
reviewed by the mgmnt

file under:
accessories - headphones / shure - replacement parts / replacement parts / shure headphones

go to detail page | close window

Shure
Large Soft Flex Sleeves for E2 & I2 - 5 Pair (EA510L)

These reusable sleeves fit comfortably in the ear and allow for ease of insertion. Fits all E2 & I2 series earphones. 5 pairs (10 total).
reviewed by the mgmnt

file under:
accessories - headphones / shure - replacement parts / replacement parts / shure headphones

go to detail page | close window

Shure
Universal Foam Sleeves - 5 Pair (EA110)

These reusable, disposable foam sleeves compress to fit gently into the ear. Once in the ear, the foam expands to form a tight yet comfortable seal that holds the earphones firmly in place. Fits all E3, E4, E5, I3, I4, and I5 series earphones. 5 pairs (10 total).
reviewed by the mgmnt

file under:
accessories - headphones / shure - replacement parts / replacement parts / shure headphones

go to detail page | close window

Stanton
3 Position Phono/Line Switch for SA-3

Fits Stanton SA-3 only.
reviewed by the mgmnt

file under:
stanton - replacement parts / replacement parts

go to detail page | close window

Stanton
Crossfader for SA-3

Fits Stanton SA-3 only.
reviewed by the mgmnt

file under:
stanton - replacement parts / replacement parts

go to detail page | close window

Stanton
H4-S Headshell

Fits most turntables with tonearms that accept screw-in headshells. This includes all Stanton models, plus Technics SL-1200 models and turntables by Numark, Vestax, etc. Comes with 2 headshell weights (2g + 4g) and an extra set of screws.
reviewed by the mgmnt

file under:
stanton - replacement parts / replacement parts / cartrdge accessories / and more

go to detail page | close window

Stanton
H4S.V2 Headshell

Now in gunmetal finish. Fits most turntables with tonearms that accept screw-in headshells. This includes all Stanton models, plus Technics SL-1200 models and turntables by Numark, Vestax, etc. Comes with 2 headshell weights (2g + 4g) and an extra set of screws.
reviewed by the mgmnt

file under:
stanton - replacement parts / replacement parts / cartrdge accessories / and more

go to detail page | close window

Stanton
Silver Faceplate for SK-2F

Alternate silver faceplate, fits Stanton SK-2F only.
reviewed by the mgmnt

file under:
stanton - replacement parts / replacement parts / dj equipment - sales + specials

go to detail page | close window

Stanton
Stanton SK-1 line fader LFSK1

Replacement line fader for Stanton SK-1 mixer.
reviewed by the mgmnt

file under:
stanton - replacement parts / replacement parts

go to detail page | close window

Stanton
Turntable Belt

Specifically made for the Stanton STR8-50, but this will work with most belt-driven turntables.
reviewed by the mgmnt

file under:
stanton - replacement parts / replacement parts

go to detail page | close window

Technics
45 Adaptor for Technics 1200 (SFWE010)

Fits all turntables.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
AC Power Cord for Technics 1200 (SFUP122M12E2)

Replacement Technics power cord for the following models: SL1200GLD, SL1200M3D, SL1200MK5,SL1210M5G, and SL1210MK5. Soldering required for installation.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Arm Clip / Arm Rest for Technics 1200 (SFPRT17201K)

Fits all Technics SL-1200 models.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Arm Lift for Technics 1200 (SFPRT18201K)

Fits all Technics SL-1200 models.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Circuit Board + RCA Cord for Technics 1200 (SFDH122-08E)

original technics replacement part

Official Technics replacement part includes the PC board as well as the RCA cord pre-soldered onto the board. Professional installation recommended.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Counter Weight / Tone Arm Balance Weight for Technics 1200 (SFPWG17201K)

Fits all Technics SL-1200 models.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Dust Cover for Technics 1200 (SFAD122-01A)

Fits all Technics SL-1200 models. Does not come with hinges.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Dust Cover Hinge - Single for Technics 1200 (SFAT122-01A)

Fits all Technics SL-1200 model dust covers. Comes with all the necessary screws and attachments. One hinge per order.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Ground Wire for Technics 1200 (SFEL026-01E1)

Standard ground wire- manufactured by Technics, but these will work on all turntables. Soldering required.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Headshell for Technics 1200 - GOLD (SFPCC31007K)

official gold headshell

Add shine to your deck with the unique golden Technics headshell. Fits most turntables with tonearms that accept screw-in headshells including all SL-1200 models, plus turntables by Stanton, Numark, Vestax, etc. and includes 0.4g top weight.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts / cartrdge accessories / and more

go to detail page | close window

Technics
Headshell for Technics 1200 (SFPCC31001K)

original technics replacement part

OVERVIEW
Fits most turntables with tonearms that accept screw-in headshells. This includes all SL-1200 models, plus turntables by Stanton, Numark, Vestax, etc.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts / cartrdge accessories / and more

go to detail page | close window

Technics
Headshell for Technics 1200 - SILVER (SFPCC31006K1)

official silver headshell

Add shine to your deck with the unique silver Technics headshell. Fits most turntables with tonearms that accept screw-in headshells including all SL-1200 models, plus turntables by Stanton, Numark, Vestax, etc. and includes +4g top weight.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts / cartrdge accessories / and more

go to detail page | close window

Technics
On/Off Knob For Technics 1200 (SFKT122-01E2)

Fits Technics SL-1200MK2 models. Soldering required.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Pitch Control for 1200MK5/M3D (SFDZ122N11-3)

original technics replacement part

Fits:
- Technics SL-1200MK5
- Technics SL-1210MK5
- Technics SL-1200M3D

Soldering and complex work is required.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Pitch Control for Technics 1200MK2 (SFDZ122N11)

Fits Technics SL-1200MK2 only. Soldering and complex work is required.

PART NO. SFDZ122N11
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Pitch Control Knob for Technics 1200 (SFKT122-02)

Fits Technics 1200 pitch sliders.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Pitch Control Reset Button for 1200MK5/M3D (RGU0611-S)

For Technics 1200 MK5 turntables.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Power Switch Knob with Shaft for MK3/MK5 Models (RFKN1200M3DP)

Fits Technics 1200 MK3 and MK5 models only.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Replacement Bulb for Pop Up Light for Technics 1200 (SFDN122-01E)

Fits all Technics SL-1200 models. Soldering required.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Replacement Foot for Technics 1200 (SFGC122-04E)

Fits all Technics SL-1200 models.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Shaft Assembly For Platter of Technics 1200 (SFMZQ20-01A)

Fits Technics 1200 models only.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Sticker - Silver/Black

The classic Technics sticker now in black and silver foil.
reviewed by snackmaster

file under:
various objects / technics - replacement parts / replacement parts / technics + dmc - dj accessories / and more

go to detail page | close window

Technics
Tonearm Assembly for 1200MK2/M3D (Silver) (P-AM18201K)

Technics Tonearm Assembly For SL-1200MK2/M3D. Soldering and complex work is required.

PART NO.P-AM18201K
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Tonearm Assembly for Technics 1200MK5 - Silver (RYQ0418-S1)

Fits all Technics SL-1200MK5 ONLY. Soldering and complex work is required.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Technics
Tonearm Assembly for Technics 1210MK5 - Black (RYQ0418A-K1)

Fits Technics SL-1200MK5 only. Soldering required and complex work is required.
reviewed by the mgmnt

file under:
technics - replacement parts / replacement parts

go to detail page | close window

Vestax
AC12A Power Supply

Replacement power supply for PMC-37 Pro, VMC-004, all PMC-07 Pro series, PCV-150, PMC-250 and PCV-180 only.
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts

go to detail page | close window

Vestax
AC-14 Power Supply for VCA Mixers

fits most Vestax mixers

Replacement power supply for:
PMC-05PRO III VCA
PMC-05PRO SL VCA
PMC-06PRO A VCA
VMC-004XL
VMC-185XL
reviewed by mgmnt

file under:
vestax - replacement parts / replacement parts

go to detail page | close window

Vestax
AC-20 Power Supply for PMC-500, PMC-CX, PMC-08PRO Mixers

Replacement power supply for the Vestax PMC-08PRO, PMC-500, and PMC-CX.
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts

go to detail page | close window

Vestax
CF-CC Crossfader with Cut Control

New crossfader from Vestax, featuring controls for fine tuning the cut-in time for both sides of the fader. There are two knobs on the main body of the fader (which you will have to take off your faceplate to access), and by adjusting these to the shortest possible cut-in time your fader will essentially be completely on or completely off with the smallest movement. This should completely eliminate any "lag" time on the crossfader, and obviously make your cuts as sharp as possible. The fader otherwise works + feels just like the rugged PCV fader Vestax has used for years. Quite an improvement.



Compatible with the following mixers:

Vestax PMC-05Pro-2

Vestax PMC-05Pro-3

Vestax PMC-05ProSL

Vestax PMC-06Pro

Vestax PMC-06Pro-A

Vestax PMC-07Pro

Vestax PMC-07Pro-ISP



NOTE: Your mixer must have a "G" in front of the serial number to be compatible.
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts

go to detail page | close window

Vestax
CLS-1 Cut Lag Spacer

Improve your scratch by reducing cut-in time on your fader with the Vestax CLS-1 spacers. These rubber spacers are inserted on both ends of the fader to shorten the fader movement and allow for quicker, more precise cuts. They also add a nice, soft bounce feel (as opposed to a hard click) to the ends of your fader. Compatible with Vestax PCV crossfaders with "SFV-03N" printed on them. Four spacers per pack.
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts / dj accessories / bestsellers - dj accessories / and more

go to detail page | close window

Vestax
DC15-A Power Supply

Replacement power supply for:

PCV-002
PCV-003
PCV-175
PMC-005A
PMC-03A
PMC-05PROD
PMC-05
PMC-05MK2
PMC-05MK3
PMC-05PRO
PMC-05PRO IIIDX
PMC-05PRO SL
PMC-05T
PMC-05FX
PMC-05PRO2
PMC-06PRO A
PMC-06PROD
PMC-10MK2
PMC-15A / 15SL
PMC-170A
PMC-17A
PMC-26
VMC-002XL
VMC-180

This unit is NOT compatible with VCA series mixers.

reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts

go to detail page | close window

Vestax
Glow In The Dark Headshell

Fits most turntables with tonearms that accept screw-in headshells. This includes all Vestax models, plus Technics SL-1200 models and turntables by Stanton, Numark, etc.
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts / cartrdge accessories / and more

go to detail page | close window

Vestax
Handy Trax Power Supply

Works with Handy Trax portable turntable.
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts

go to detail page | close window

Vestax
Headshell - Black

Fits most turntables with tonearms that accept screw-in headshells. This includes all Vestax models, plus Technics SL-1200 models and turntables by Stanton, Numark, etc.
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts / cartrdge accessories / and more

go to detail page | close window

Vestax
Headshell - Silver

Fits most turntables with tonearms that accept screw-in headshells. This includes all Vestax models, plus Technics SL-1200 models and turntables by Stanton, Numark, etc.
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts

go to detail page | close window

Vestax
Line / Transform Switch for Mixers

fits most Vestax mixers

Fits all Vestax PMC-05 Pro, 06 Pro and 07 Pro mixers (including Samurai).
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts

go to detail page | close window

Vestax
PCV Crossfader (CF-PCV)

fits most Vestax mixers

Features an improved rail system over the original Vestax faders, which equals a smoother glide and longer life. Inner dust cover prevents dust from contacting glides. Works with:
- all PMC-05 Pro
- 06 Pro and 07 Pro mixers (except Samurai)
- PMC-250
- PCV-002
- PCV-175
- PCV-180
- PCV-275
- PCV-003
- PCV-150
- PMC-CX
- PMC-500
- VMC-002
- VMC-004
- QFO
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts

go to detail page | close window

Vestax
PCV Line Fader

PCV line/volume fader for all PMC-05 Pro and 06 Pro mixers (including Samurai), and PMC-37 Pro.
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts

go to detail page | close window

Vestax
Replacement Fader Knob

Fits all PCV faders.
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts

go to detail page | close window

Vestax
Replacement Fader Knob - Black

Replacement fader knob for all Vestax crossfaders.
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts

go to detail page | close window

Vestax
Replacement Fader Knob - Silver

Fits all Vestax faders.
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts

go to detail page | close window

Vestax
Sloped Monitor Level Fader Knob for PMC-07, PMC-05 - Gold

Fits small fader for headphone monitoring on PMC05 and PMC-07 mixers.
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts

go to detail page | close window

Vestax
Small Replacement Fader Knob - Silver

Fits small EQ up faders (Vestax 07/08 Pro).
reviewed by the mgmnt

file under:
vestax - replacement parts / replacement parts

go to detail page | close window