TURNTABLE LAB

Odyssey
LSTAND Digital DJ Laptop Stand - Black

Odyssey's LStand is a laptop stand similar to the HiRise stand by Serato. The LStand is designed to elevate your laptop over your DJ setup, eliminating the "where do I put my laptop while I DJ" problem. In addition the height-adjustable, elevated angle gives you easier access to your laptop controls.

The LStand works as a stand-alone component as well as an extension for a dj coffin or table. Remove the two bottom supports and replace them with the included clamps, and the LStand will attach onto any surface up to 2 1/8" thick. The clamps can angled in 2 different directions, allowing you to attach it both to a flat table or the vertical side of a DJ coffin. When not in use, the LStand conveniently folds flat into the box that it comes in.

There are several differences with the LStand and the HiRise stands. First, as mentioned, the HiRise can be used in several different situations, while the HiRise only works as a stand-alone component. Secondly, the LStand is much heavier than the HiRise (5.5 vs 1.5 lbs in the box). Depending on your situation, this can work for or against you. The extra weight will provide a sturdier surface, but at the expense of 4 traveling pounds. In addition, boxes to both models serve as the carrying case. The HiRise case is made of a sturdy lightweight plastic. The LStand comes in a cardboard case which will not stand up to frequent travel. Lastly, the LStand comes in at a more inexpensive price.
reviewed by the mgmnt

file under:
all - digital djing / accessories - digital djing / odyssey dj gear /

go to detail page | close window

Odyssey
LSTAND-M Folding Laptop Stand

If you are a digital DJ, a stand for your laptop that is easy to use and quick to setup is a necessity. The LSTAND Mobile improves upon the best-selling LSTAND by making it even easier to setup with a simple folding function that allows the stand to be set in a snap and folded flat for easy transport. The stand is constructed of sturdy metal (yet weighs only 5lbs) and comes with stand alone legs for table top use, and clamps so it can be attached to a table or wall. Can be used to hold up laptops, Interfaces, effects units, samplers, controllers, and more. Includes storing pouch. Recommended.


reviewed by the mgmnt

file under:
all - digital djing / accessories - digital djing / odyssey dj gear /

go to detail page | close window

Odyssey
Flite Zone Turntable Case - Black (FZ1200)

Odysseys' Flite Zone Turntable Case offers heavy duty protection for your deck while in transport. This sturdy, flight ready (ATA Certified) case is constructed of fiberglass and wood laminate and features a stackable design (useful when traveling with 2 decks), recessed hardware and handle, and a thick, foam-lined interior to keep your turntable safe. An essential piece for DJ's that bring their own tables to gigs. Fits most turntables.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Glide Style Battle Mode Turntable DJ Coffin for 10" Mixer (FZGSBM10W)

Odyssey's Glide Style turntable console is made to house 2 turntables in "battle mode", a 10" mixer, and features a gliding platform for your laptop and Serato unit. Above the center-mounted mixer, a gliding laptop platform slides out on a unique rail system, which contains a hidden space within the platform which can house a Rane Serato unit. This patent pending design locks into place away from the mixer area, leaving plenty of space for mixing. Coffin features wheels for easy transport.

Note: The gliding laptop platform can be positioned as needed. For the safety of your equipment, please be aware that the platform can be removed when slid out to it's furthest point. Odyssey does not recommend storing your laptop inside the case.
reviewed by the mgmnt

file under:
all - digital djing / record bags + equipment cases / accessories - digital djing / odyssey dj gear / and more

go to detail page | close window

Odyssey
KCC-4 Pro Cartridge Case (KCC4PRO)

Transport up to four cartridges securely with this super protective cartridge case from Odyssey. Fits four cartridges of all popular models (headshell mounted and Ortofon concord style).
reviewed by C'mish

file under:
record bags + equipment cases / cartrdge accessories / odyssey dj gear / and more

go to detail page | close window

Odyssey
LSTAND-S Laptop Stand

Odyssey's LSTAND-S is the super affordable stand alone only version of the best selling LSTAND. The LSTAND-S functions and works just like the LSTAND but without the table clamping feature. Use the LSTAND-S to elevate your laptop over your DJ setup, eliminating the "where do I put my laptop while I DJ" problem. In addition the height-adjustable, elevated angle gives you easier access to your laptop controls. Can also be used with CD-J's and other accessories. Sturdy metal construction and a great deal at just under 30 bucks. Recommended.
reviewed by the mgmnt

file under:
all - digital djing / accessories - digital djing / odyssey dj gear /

go to detail page | close window

Odyssey
2-Row 45 Case

Odyssey's ATA Flite-Ready case features two individual compartments that hold a total of 120 7" records. Chrome plated hardware and a removable foam padded lid gives your 45s the protection they deserve.

Dimensions (exterior):
20"W x 11"H x 11"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Universal CDJ / Mixer Bag (BCDJMIX)

Finally a bag specifically designed for carrying you CDJ or mixer without fear of damage during transport. Fits most 10-12" mixers with ease and keeps them padded and protected with a sturdy foam construction for the ride. Comes with a removable inner foam frame to make more room for bigger models and rugged non-slip handles and shoulder strap for a comfortable transport. Plus, the interior comes with two 1.25" thick width adjustment inserts and two 0.5" thick depth (front to back)adjustment inserts.

Dimensions
14"W x 18"H x 8"D (Exterior)
13.3"W x 14.5"H x 4"D (Interior)
reviewed by C'mish

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Ortofon Cartridge Case (KCC4)

Stylish, brushed metal case holds 4 cartridges (Concorde style) and up to 8 stylii.
reviewed by mgmnt

file under:
record bags + equipment cases / cartrdge accessories / odyssey dj gear / and more

go to detail page | close window

Odyssey
Flight Zone 10" Mixer Case (FZ10Mix)

The Flight Zone Mixer case is custom built to transport your 10" mixer in style, while offering full protection during transit. The case features foam lining to keep your mixer secure within the sturdy exterior, and also features a convenient front panel provides full protection during transit but slides out for access to front mixer controls during use. The stackable lid doubles as an elevated base for those lower tables or taller DJs (lid not shown). Recessed handles and latches and ball corners for stacking. Fits most 10" mixers.

Mixer well dimensions: 10.875"(w) x 2.875"(h) x 15.25"(d)

Cable well dimensions: 9.75"(w) x 4.5"(h) x 4"(d)

Fits mixers 8.75" to 10.75" wide, up to 15" deep and 3" tall.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Serato Tray for LSTAND (LSTANDTRAY)

Works with the Odyssey LSTAND to hold your Serato box on or other accessories. Sturdy metal construction.
reviewed by the mgmnt

file under:
all - digital djing / accessories - digital djing / odyssey dj gear /

go to detail page | close window

Odyssey
Battle Mode Coffin for 10" Mixer (FZBM10W)

Odyssey's Flight Zone Battle Mode Case holds and protects an entire setup including 2 turntables battle style (sideways) and a mixer. The case features fully padded turntable wells, center mixer slot with slide out front panel, detachable lid, and recessed handles and latches. The case also features wheels for easy transportation and is ATA approved. Fits 1200 styles tables and most 10" mixers.

Dimensions (exterior):
47"W x 9"H x 22.5"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Black Label Turntable Flight Case (FZ1200BL)

All-black turntable flight case from Odyssey. The sturdy Black label case is constructed with the same high standards as the regular ATA approved Flight Zone case, but with the aluminum trim and hardware anodized and powder-coated in black for a sleek look. The inner compartment is lined with dense foam to keep your turntable safe and features a valley for ventilation and an area for cable management. An essential piece for DJ's that bring their own tables to gigs. Fits most turntables.

Dimensions:
- 20.25"W x 9.25"H x 17.25"D (Exterior)
- 18"W x 3"H x 15.25"D (Interior)
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Black Label Battle Mode Coffin for 10" Mixer (FZBM10WBL)

All-black turntable coffin from Odyssey. These sturdy Black label cases are constructed with the same high standards as the regular ATA approved Flight Zone series cases, but with the aluminum trim and hardware anodized and powder-coated in black for a sleek new look. Odyssey's Flight Zone Battle Mode Case holds and protects an entire setup including 2 turntables battle style (sideways) and a mixer. The case features fully padded turntable wells, center mixer slot with slide out front panel, detachable lid, and recessed handles and latches. The case also features wheels for easy transportation and is ATA approved. Fits 1200 styles tables and most 10" mixers.

Dimensions (exterior):
47"W x 9"H x 22.5"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Technics SL-1200 Faceplate - Blue (AFPSL1200BLU)

add shine to your turntable

Odyssey's stylish faceplate lends a brand new look to the any Technics SL1200 turntable. Not only does it offer protection, but it just makes your turntables have a brand new swag.
reviewed by the mgmnt

file under:
dj accessories / odyssey dj gear /

go to detail page | close window

Odyssey
CLP100P Record Case

Keep your vinyl safe and secure with Odyssey's carpeted LP cases. This model holds up to 100 LPs/12"s and features steel corners and detachable lid.

Dimensions (exterior):
14.5"W x 14"H x 14"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
CTTP Pro 1200 Case

Pro carpeted turntable case from Odyssey. This popular case used is one of the best ways to transport your turntables. Features a fully foam lined interior, recessed hardware and ball corners. Case is shown sitting atop the removable lid, which acts as a riser. Fits most 1200 style turntables.

Dimensions (exterior):
22.5"W x 8.5"H x 17"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
CLP180E Record Case

Keep your vinyl safe and secure with Odyssey's carpeted LP cases. This model holds up to 180 LPs/12"s and features surface mount hardware and detachable lid

Dimensions (exterior):
28"W x 15"H x 14"D.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Flite Zone Glide Style 10" Mixer Case (FZGS10MIX)

Clever mixer case from Odyssey. The Flite Zone Glide Style Mixer case not only protects you 10" mixer during travel, but also acts as a laptop stand when in open and in use. The unique dual sliding platforms mounted above the mixer compartment allow you to place your laptop and interface or hard drive at the perfect place for digital djing. The top layer platform is also expandable for larger laptops or extra room for accessories. The mixer compartment features an extra deep well and a cable trench to make plenty of room for cables and power supplies. This piece is fully lined with thick foam and constructed of durable fiberglass and laminate. Backed by a limited lifetime warranty.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Krom LP Case - Black (KLP1BLK)

hardcase for your vinyl

The KLP1 holds and protects 70 LPs in it's foam-lined interior compartment. The rugged exterior features a removable lid and lockable butterfly latch.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
LSTAND Laptop Stand + Interface Tray (LSTANDCOMBO)

Two of Odyssey's top DJ accessories together in one money saving combo pack.


If you are a digital DJ, a stand for your laptop that is easy to use and quick to setup is a necessity. The LSTAND is designed to elevate your laptop over your DJ setup, eliminating the "where do I put my laptop while I DJ" problem. In addition the height-adjustable, elevated angle gives you easier access to your laptop controls.
It works as a stand-alone component as well as an extension for a dj coffin or table. Remove the two bottom supports and replace them with the included clamps, and the LStand will attach onto any surface up to 2 1/8" thick. The clamps can angled in 2 different directions, allowing you to attach it both to a flat table or the vertical side of a DJ coffin. The tray attaches to the LSTAND to hold your Serato box, interface, hard drive, or other accessories. Sturdy metal construction.




reviewed by the mgmnt

file under:
all - digital djing / accessories - digital djing / odyssey dj gear /

go to detail page | close window

Odyssey
Technics SL-1200MK2 Faceplate - Red (AFPSL1200RED)

add shine to your turntable

Odyssey's stylish faceplate lends a brand new look to your turntable. Not only does it offer protection, but it just makes your turntables have a brand new swag. FITS TECHNICS 1200MK2 ONLY.
reviewed by the mgmnt

file under:
dj accessories / odyssey dj gear /

go to detail page | close window

Odyssey
CLP200P Record Case

Keep your vinyl safe and secure with Odyssey's carpeted LP cases. This model holds up to 200 LPs/12"s and features surface mount hardware and detachable lid.

Dimensions (exterior):
28"W x 14"H x 14.5"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Black Label Universal 10" Mixer Case (FZ10MIXBL)

All-black mixer case from Odyssey. These sturdy Black label cases are constructed with the same high standards as the regular ATA approved Flight Zone case, but with the aluminum trim and hardware anodized and powder-coated in black for a sleek new look.
The Flight Zone Mixer case is custom built to transport your 10" mixer in style, while offering full protection during transit. The case features foam lining to keep your mixer secure within the sturdy exterior, and also features a convenient front panel provides full protection during transit but slides out for access to front mixer controls during use. The stackable lid doubles as an elevated base for those lower tables or taller DJs (lid not shown). Recessed handles and latches and ball corners for stacking. Fits most 10" mixers.

Mixer well dimensions: 10.875"(w) x 2.875"(h) x 15.25"(d)

Cable well dimensions: 9.75"(w) x 4.5"(h) x 4"(d)

Fits mixers 8.75" to 10.75" wide, up to 15" deep and 3" tall.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Black Label Universal 12" Mixer Case (FZ12MIXBL)

heavy-duty case for your mixer

Transport your 12" mixer in style with Odyssey's Black Label Series of ATA flight cases. Made to the exact same standards as our Flight Zone series but with a twist - the components used to produce this series, including the aluminum trim and hardware, is now anodized and/or powder coated in "Black" for a slick look. Features foam lining, recessed handles, removable lid and stackable ball corners to assure your mixer is safe and secure.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
LP Case (FZLP80)

Odyssey's ATA approved hard LP case protects your valuable records in transit. It features a half-split design for better viewing of your records, heavy-duty ball corners, recessed handles and latches. Fits 80 LPs/12"s.

Dimensions (exterior):
15"W x 15"H x 15"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Small Utility Case (FZUC)

** DROP-SHIPS **

Protect your smaller digital recorders, samplers, drum machines, and controllers with this case from Odyssey. This case comes with pre-cut, diced foam - so you can custom fit small production units and digital recorders. The Digital Recorder Case features heavy duty construction and hinged lid lined with eggshell foam. Fits gear up to 11" wide, 9.25" deep and 4" high.

Fits these units and more:
AKAI MPC 500
AKAI XR20
ROLAND SP-404
ROLAND SP-303
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
X-Stand Heavy-Duty DJ Stand (LTBXS)

pro stand for DJ coffins

Heavy duty X-stand for your DJ coffin. This item ships un-assembled.

Features:
- Designed to support Dj coffins
- Solid twin steel bracing with extra deep support bars to support larger gear.
- Extra deep base for added stability
- Anti-slip rubber pads
- 200 lbs max load (evenly distributed )
- Folded dims: 15" x 10.25" x 2.75'
reviewed by the mgmnt

file under:
dj accessories / odyssey dj gear /

go to detail page | close window

Odyssey
Adjustable DJ Chair (DJCHAIR)

sit comfortably while DJing

Odyssey once again introduces a product you can use at every gig. The DJ Chair from Odyssey allows you to sit back at a confortable height while reducing fatigue and stress on your back and legs during those long gigs. The 5 adjustment levels, from 19" to 33", make you look cool without the appearance of sitting back on the job.

reviewed by the mgmnt

file under:
dj accessories / odyssey dj gear /

go to detail page | close window

Odyssey
Black Label Battle Mode Coffin for 12" Mixer (FZBM12WBL)

All-black turntable coffin from Odyssey. These sturdy Black label cases are constructed with the same high standards as the regular ATA approved Flight Zone series cases, but with the aluminum trim and hardware anodized and powder-coated in black for a sleek new look. Odyssey's Flight Zone Battle Mode Case holds and protects an entire setup including 2 turntables battle style (sideways) and a 12" mixer. The case features fully padded turntable wells, center mixer slot with slide out front panel, detachable lid, and recessed handles and latches. The case also features wheels for easy transportation and is ATA approved. Fits 1200 styles tables and most 12" mixers.

Dimensions (exterior):
48.5"W x 9.75"H x 23.5"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Black Label Glide Style Battle Mode Turntable DJ Coffin for 12" Mixer (FZGSBM12WBL)

heavy duty case with gliding platforms for laptop and interface

Now in sleek all black finish. Odyssey's Glide Style turntable console is made to house 2 turntables in "battle mode", a 12" mixer, and features a gliding platform for your laptop and Serato unit. Above the center-mounted mixer, a gliding laptop platform slides out on a unique rail system, which contains a hidden space within the platform which can house a Rane Serato unit. This patent pending design locks into place away from the mixer area, leaving plenty of space for mixing. Coffin features wheels for easy transport.

Note: The gliding laptop platform can be positioned as needed. For the safety of your equipment, please be aware that the platform can be removed when slid out to it's furthest point. Odyssey does not recommend storing your laptop inside the case.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Krom LP Case - Silver (KLP1SIL)

hardcase for your vinyl

The KLP1 holds and protects 70 LPs in it's foam-lined interior compartment. The rugged exterior features a removable lid and lockable butterfly latch.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Technics SL-1200 Faceplate - Gold (AFPSL1200GLD)

add shine to your turntable

Odyssey's stylish faceplate lends a brand new look to the any Technics SL1200 turntable. Not only does it offer protection, but it just makes your turntables have a brand new swag.
reviewed by the mgmnt

file under:
dj accessories / odyssey dj gear /

go to detail page | close window

Odyssey
ATT2 DJ Truss Table

The ATT2 upgrades Odyssey's ATT Truss Table by adding fold-flat portability, and swiveling side platforms. Each of the 3 tabletops measure: 18.5" x 19.5" and make for a stylish and versatile table for you equipment whether in the club, restaurant or home studio.

Dimensions (exterior):
60"W x 35.25"H x 19.25"D
(see close up picture for specific measurements)
reviewed by the mgmnt

file under:
dj accessories / odyssey dj gear /

go to detail page | close window

Odyssey
Black Label Large Format Single CD Player Case (FZCDJBL)

heavy duty flight case for your CDJ

Odyssey's Black Label Series of ATA flight cases are made to the exact same standards as their Flight Zone series but with a twist. Each compartment feature a valley or pit as you might call it that allows for more ventilation of the gear as well as an area for cables management.The components used to produce this series, including the aluminum trim and hardware, is now anodized and/or powder coated in "Black" for a slick look.

Fits CD players such as:

• Denon DN-S3500
• Denon DN-S5000
• Pioneer CDJ-800MK2
• Pioneer CDJ-1000MKII/MK3
• Stanton C-303
• Stanton C-313/C-314
• Technics SL-DZ1200

Dimensions (exterior):
15.25"W x 8.5"H x 19.75"D

Dimensions (interior):
12.75"W x 3.5"H x 14.5-17.5"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Digital Recorder Case (FZDRC)

Protect your valuable digital recorders, samplers, drum machines, controllers and other tabletop gear with Odyssey's Pro Case. This case comes with pre-cut, diced foam - so you can custom fit most production units and digital recorders. The Digital Recorder Case feature heavy duty butterfly latches with padlock slots and removable hinged lids. Fits gear up to 22.25" wide, 15.5" deep and 6" high. Diced foam is 1.25" thick.

Fits these units and more:
AKAI MPC 2500
AKAI MPC 1000
AKAI DPS16STD
BOSS BR8
KORG D1600
ROLAND VS 1880
ROLAND CDX1
ROLAND VS 890HD
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Flight Zone 12" Mixer Case (FZ12Mix)

The Flight Zone Mixer case is custom built to transport your 12" mixer in style, while offering full protection during transit. The case features foam lining to keep your mixer secure within the sturdy exterior, and also features a slant-angle bottom to lift up the rear of the mixer for easier in-case viewing of controls and displays. The stackable lid doubles as an elevated base for those lower tables or taller DJs (lid not shown). Recessed handles and latches and ball corners for stacking. Fits most 12" mixers.

12" version fits mixers 12.25 wide up to 14.25 deep and 3" tall.

Dimensions (exterior):
15.50"W x 9.50"H x 19.50"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Flite Zone Glide Style 12" Mixer Case (FZGS12MIX)

Clever mixer case from Odyssey. The Flite Zone Glide Style Mixer case not only protects you 12" mixer during travel, but also acts as a laptop stand when in open and in use. The unique dual sliding platforms mounted above the mixer compartment allow you to place your laptop and interface or hard drive at the perfect place for digital djing. The top layer platform is also expandable for larger laptops or extra room for accessories. The mixer compartment features an extra deep well and a cable trench to make plenty of room for cables and power supplies. This piece is fully lined with thick foam and constructed of durable fiberglass and laminate. Backed by a limited lifetime warranty.
reviewed by the mgmnt

file under:
all - digital djing / record bags + equipment cases / accessories - digital djing / odyssey dj gear / and more

go to detail page | close window

Odyssey
Battle Mode Coffin for 12" Mixer (FZBM12W)

battle style case for your dj setup

Odyssey's ATA Battle Mode Console features 90 degree turntable wells (sideways - aka battle mode). This case features fully padded turntable wells and recessed hardware. Holds two 1200 style turntables in Battle position, and one 12" mixer. Includes wheels for easy transport.

Can accommodate Technics as well as Numark Turntables.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Black Label Glide Style 10" Mixer Case (FZGS10MIXBL)

pro mixer case with sliding platforms for laptop and interface

Odyssey's Black Label Series of ATA flight cases are made to the exact same standards as their Flight Zone series but with a twist. Each compartment features a valley that allows for more ventilation of the gear as well as an area for cables management.The components used to produce this series, including the aluminum trim and hardware, is now anodized and/or powder coated in "Black" for a slick look. The glide style feature allows you to place your laptop and interface above your mixer on sliding platforms for easy access. Holds 10" mixers.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Carpeted DJ Table (CTBC2060)

adjustable table for your setup

Use this sturdy and clean looking work surface to set up your system or music. This professional table measures 60 inches wide and 20 inches deep and comes with a pre tapped port hole for cable runs and a strap handle for easy carrying. The folding leg system is height-adjustable from 26 to 38 inches.

Dimensions (exterior):
60"W x 26-38"H x 20"D

Weight:
29 lbs
reviewed by the mgmnt

file under:
dj accessories / odyssey dj gear /

go to detail page | close window

Odyssey
Large Format Single CD Player Case (FZCDJ)

heavy duty flight case for your CDJ

Odyssey's ATA Large Format CD Player case features a slide-out panel for entry to the front-loading CD slot, and hardware includes recessed latches and handles and stackable ball corners. Fits CD players such as:

- Denon DN-S3500
- Denon DN-S5000
- Pioneer CDJ-800MK2
- Pioneer CDJ-1000MKII/MK3
- Stanton C-303
- Stanton C-313/C-314
- Technics SL-DZ1200

Dimensions (exterior):
15.50"W x 8.75"H x 19.50"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
L-Evation Universal Stand (LUNISP)

Heavy duty stands from Odyssey for your digital equipment. The L-Evation Universal Stand provides an effective way to store you laptop, CD player, effects unit, or other equipment above your turntable and mixer saving keeping it at a comfortable access level and saving space at the same time. The stand is easy to assemble and features adjustable height and a super strong support arm to mount your gear on. Please check below for dimensions to make your equipment will fit properly.

top plate dimensions: 13.5" W x 1.25" H x 14.5-17.5" D
pole height: 16"
bottom plate: 17.75" W x 18" D
top plate with extension & pole depth: 22"
reviewed by the mgmnt

file under:
all - digital djing / dj accessories / accessories - digital djing / odyssey dj gear / and more

go to detail page | close window

Odyssey
Technics SL-1200 Faceplate - Champagne Gold (AFPSL1200CHA)

add shine to your turntable

Odyssey's stylish faceplate lends a brand new look to the any Technics SL1200 turntable. Not only does it offer protection, but it just makes your turntables have a brand new swag.
reviewed by the mgmnt

file under:
dj accessories / odyssey dj gear /

go to detail page | close window

Odyssey
Universal 10" Battle Tray (FZBB10)

set your mixer up between 2 cases

Odyssey's new 10" Battle Tray is perfect for setting up a mixer between two cases, raising the mixer surface to allow easier access and quicker moves. Essential for battle DJs using larger format mixers.

Dimensions (exterior):
12.75"W x 3.5"H x 19"D
reviewed by the mgmnt

file under:
dj accessories / odyssey dj gear /

go to detail page | close window

Odyssey
ATT DJ Truss Table

Sleek Truss Table from Odyssey adds a professional studio look to any room with its unique diamond pattern textured top. Constructed of high-grade aluminum, this is a sturdy table for dj setups at clubs, restaurants or home studios.

Dimensions (exterior):
59.24"W x 31.5"H x 20"D
reviewed by the mgmnt

file under:
dj accessories / odyssey dj gear /

go to detail page | close window

Odyssey
Black Label Glide Style Battle Mode Turntable DJ Coffin for 10" Mixer (FZGSBM10WBL)

heavy duty case with gliding platforms for laptop and interface

Now in sleek all black finish. Odyssey's Glide Style turntable console is made to house 2 turntables in "battle mode", a 10" mixer, and features a gliding platform for your laptop and Serato unit. Above the center-mounted mixer, a gliding laptop platform slides out on a unique rail system, which contains a hidden space within the platform which can house a Rane Serato unit. This patent pending design locks into place away from the mixer area, leaving plenty of space for mixing. Coffin features wheels for easy transport.

Note: The gliding laptop platform can be positioned as needed. For the safety of your equipment, please be aware that the platform can be removed when slid out to it's furthest point. Odyssey does not recommend storing your laptop inside the case.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
CBM10 Pro Battle Mix Coffin

Battle style (turntables at 90 degrees) pro DJ console with fully padded turntable wells and recessed hardware from Odyssey. Fits one 10 inch mixer and two 1200 style turntables. Actual mixer well width is 9.25". Hinged lid can act as a riser.

Dimensions (exterior):
57"W x 7.5"H x 21.5"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Glide Style Battle Mode Serato Console Coffin for 12" Mixer (FZGSBM12W)

heavy duty case with gliding platforms for laptop and interface

Odyssey's Glide Style turntable console is made to house 2 turntables in "battle mode", a 12" mixer, and features a gliding platform for your laptop and Serato unit. Above the center-mounted mixer, a gliding laptop platform slides out on a unique rail system, which contains a hidden space within the platform which can house a Rane Serato unit. This patent pending design locks into place away from the mixer area, leaving plenty of space for mixing. Coffin features wheels for easy transport.

Note: The gliding laptop platform can be positioned as needed. For the safety of your equipment, please be aware that the platform can be removed when slid out to it's furthest point. Odyssey does not recommend storing your laptop inside the case.

Mixer well holds mixers with a width of 12.50 ", depth up to 21.5" and 3.25" tall.

Turntable wells hold turntables width of 15", depth up to 18"

Dimensions (exterior):
47.5"W x 12.5"H x 22"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Glide Style Standard Position Turntable DJ Coffin for 12" Mixer (FZGSDJ12W)

Odyssey's Glide Style turntable coffin is made to house 2 turntables standard style + a 12" mixer, and features a gliding platform for your laptop and Serato unit. Above the center-mounted mixer, a gliding laptop platform slides out on a unique rail system, which contains a hidden space within the platform which can house a Rane Serato unit. This patent pending design locks into place away from the mixer area, leaving plenty of space for mixing. Coffin features wheels for easy transport.

Note: The gliding laptop platform can be positioned as needed. For the safety of your equipment, please be aware that the platform can be removed when slid out to it's furthest point. Odyssey does not recommend storing your laptop inside the case.

Turntable wells dimensions:18"W x 3.75"H x 15"D

Mixer well dimensions:12.5"W x 3.75"H x 14.38"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Large Format CD Player Case (FZCDJ)

Large format CD Player case from Odyssey. This heavy duty case is ATA approved and features sturdy construction with a slide out panel for entry to front-loading CD slots, recessed latches and handles, and stackable ball corners.

Fits the following players:
- Denon DN-S3500
- Denon DN-S5000
- Pioneer CDJ-800MK2
- Pioneer CDJ-1000MKII/MK3
- Stanton C-303
- Stanton C-313/C-314
- Technics SL-DZ1200

Dimensions (exterior):
19.50"W x 8.75"H x 15.50"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Standard Position Turntable Coffin for 10" Mixer (FZDJ10W)

Standard style, ATA approved coffin from Odyssey. This heavy duty coffin fits and protects two 1200 style turntables in the standard position with a 10" mixer in the center. The case features padded turntable wells, stackable ball corners, recessed handles and latches, and a slide out front panel for mixer access.

Dimensions (exterior):
46"W x 8"H x 22"D

reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Black Label Glide Style 12" Mixer Case (FZGS12MIXBL)

pro mixer case with sliding platforms for laptop and interface

Odyssey's Black Label Series of ATA flight cases are made to the exact same standards as their Flight Zone series but with a twist. Each compartment features a valley that allows for more ventilation of the gear as well as an area for cables management.The components used to produce this series, including the aluminum trim and hardware, is now anodized and/or powder coated in "Black" for a slick look. The glide style feature allows you to place your laptop and interface above your mixer on sliding platforms for easy access. Holds 12" mixers.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Black Label Glide Style Large Format CD DJ Coffin for 10" Mixer (FZGS10CDJWBL)

heavy duty case with gliding platforms for laptop and interface

Now in sleek all black finish. Odyssey's Glide Style turntable console is made to house 2 large format CD players, a 10" mixer, and features a gliding platform for your laptop and Serato unit. Above the center-mounted mixer, a gliding laptop platform slides out on a unique rail system, which contains a hidden space within the platform which can house a Rane Serato unit. This patent pending design locks into place away from the mixer area, leaving plenty of space for mixing. Coffin features wheels for easy transport.

Note: The gliding laptop platform can be positioned as needed. For the safety of your equipment, please be aware that the platform can be removed when slid out to it's furthest point. Odyssey does not recommend storing your laptop inside the case.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Black Label Glide Style Large Format CD DJ Coffin for 12" Mixer (FZGS12CDJWBL)

heavy duty case with gliding platforms for laptop and interface

Now in sleek all black finish. Odyssey's Glide Style turntable console is made to house 2 large format CD players, a 12" mixer, and features a gliding platform for your laptop and Serato unit. Above the center-mounted mixer, a gliding laptop platform slides out on a unique rail system, which contains a hidden space within the platform which can house a Rane Serato unit. This patent pending design locks into place away from the mixer area, leaving plenty of space for mixing. Coffin features wheels for easy transport.

Note: The gliding laptop platform can be positioned as needed. For the safety of your equipment, please be aware that the platform can be removed when slid out to it's furthest point. Odyssey does not recommend storing your laptop inside the case.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Black Label Large Format CD DJ Coffin for 10" Mixer (FZ10CDJWBL)

All-black turntable CD Turntable coffin from Odyssey. These sturdy Black label cases are constructed with the same high standards as the regular ATA approved Flight Zone series cases, but with the aluminum trim and hardware anodized and powder-coated in black for a sleek new look. Odyssey's Flight Zone Case holds and protects an entire setup including 2 large format CD players and a 10" mixer. Each compartment feature a valley or pit as you might call it that allows for more ventilation of the gear as well as an area for cables management. The case features fully padded wells, 3 removable front covers, detachable lid, and recessed handles and latches. The case also includes wheels for easy transportation and is ATA approved.

Dimensions (exterior):
41"W x 9.5"H x 20"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Black Label Large Format CD DJ Coffin for 12" Mixer (FZ12CDJWBL)

All-black turntable CD Turntable coffin from Odyssey. These sturdy Black label cases are constructed with the same high standards as the regular ATA approved Flight Zone series cases, but with the aluminum trim and hardware anodized and powder-coated in black for a sleek new look. Odyssey's Flight Zone Case holds and protects an entire setup including 2 large format CD players and a 12" mixer. Each compartment feature a valley or pit as you might call it that allows for more ventilation of the gear as well as an area for cables management. The case features fully padded wells, 3 removable front covers, detachable lid, and recessed handles and latches. The case also includes wheels for easy transportation and is ATA approved.

Dimensions (exterior):
43"W x 9.5"H x 19.125"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Black Label Medium Format Single CD Player Case (FZCDIBL)

heavy duty flight case for your CDJ

Odyssey's Black Label Series of ATA flight cases are made to the exact same standards as their Flight Zone series but with a twist. Each compartment feature a valley or pit as you might call it that allows for more ventilation of the gear as well as an area for cables management.The components used to produce this series, including the aluminum trim and hardware, is now anodized and/or powder coated in "Black" for a slick look. Made for mid-sized CD players.


Dimensions (exterior):
12"W x 9.25"H x 19.25"D

Dimensions (interior):
9.5"W x 3.625"H x 13.5-16.5"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
CDJ10 Pro Turntable Coffin

Standard style pro DJ console with fully padded turntable wells and recessed hardware from Odyssey. Fits one 10 inch mixer and two 1200 style turntables. Actual mixer well width is 9.25". Hinged lid included (not shown).

Dimensions (exterior):
52"W x 7"H x 18.5"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Glide Style Standard Position Turntable DJ Coffin for 10" Mixer (FZGSDJ10W)

Odyssey's Glide Style turntable coffin is made to house 2 turntables standard style + a 10" mixer, and features a gliding platform for your laptop and Serato unit. Above the center-mounted mixer, a gliding laptop platform slides out on a unique rail system, which contains a hidden space within the platform which can house a Rane Serato unit. This patent pending design locks into place away from the mixer area, leaving plenty of space for mixing. Coffin features wheels for easy transport.

Note: The gliding laptop platform can be positioned as needed. For the safety of your equipment, please be aware that the platform can be removed when slid out to it's furthest point. Odyssey does not recommend storing your laptop inside the case.

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Large Format CD DJ Coffin for 10" Mixer (FZ10CDJW)

Odyssey's CD DJ Coffins protects and hold two large format tabletop CD players and one 10" mixer. These ATA Rolling Coffins feature rugged built-in wheels, heavy duty spring-loaded latches, stackable ball corners, and front access panels. Cabling is clean and easy through convenient access ports throughout.

The FZ10CDJW mixer well holds mixers with a width from 8.75" to 10.25", depth up to 14.25" and 3.25" tall. The CD wells can hold a variety of players including but not limited to the following:

•Denon: DN-S3500/DN-S5000/
•Pioneer: CDJ-800MK2/CDJ-1000MKII/MK3
•Stanton:C-303/C-313/C-314/C-324
•Technics: SL-DZ1200
and many more
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Large Format CD DJ Coffin for 12" Mixer (FZ12CDJW)

Odyssey's CD DJ Coffins hold and protect two large format tabletop CD players and one 12" mixer. These ATA Rolling Coffins feature rugged built-in wheels, heavy duty spring-loaded latches, stackable ball corners, and front access panels. Cabling is clean and easy through convenient access ports throughout.

The FZ12CDJW mixer well holds mixers with a width of about 12.5", depth up to 14.5" and 3.5" tall. The CD wells can hold a variety of players including but not limited to the following:

• Denon DN-S3500
• Denon DN-S5000
• Pioneer CDJ-800MK2
• Pioneer CDJ-1000MKII/MK3
• Stanton C-303
• Stanton C-303 C-313 C-314 C-324
• Technics SL-DZ1200

reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
L-Evation Dual Universal DJ Stand (LUNISPDB)

professional dual stand for laptops and equipment

Elevate your laptop and pro audio gear in style with Odyssey's heavy-duty L-EVATION stands. This universal version has adjustable depth support for your laptops, most tabletop CD players, effects units, and other pro gears. Easy to assemble and customize with its adjustable height and strong robotic-like support arm. Have it set-up over your turntable, mixer, and other gears, giving you that extra cutting edge in your mixes with easy access to your mounted gear.
reviewed by the mgmnt

file under:
all - digital djing / accessories - digital djing / odyssey dj gear /

go to detail page | close window

Odyssey
L-Evation Stand for Dual Pioneer CDJ-1000 (LCDJSPDB)

pro stand for a pair of CDJs

Elevate your pro audio gear in style with Odyssey's heavy-duty L-EVATION stands. The LCDJSPDB is made to hold two Pioneer CDJ-1000 players. Easy to assemble and customize with its adjustable height and strong robotic-like support Dual arm. Set it up over your turntable, mixer, and other gear giving you easy access more tabletop gear.
reviewed by the mgmnt

file under:
all - digital djing / accessories - digital djing / odyssey dj gear /

go to detail page | close window

Odyssey
L-Evation Universal Stand (LCDJSP)

Heavy duty stand from Odyssey for your CDJ. The LCDJSP is custom made to store your Pioneer CDJ 1000MK3 above your turntable and mixer saving keeping it at a comfortable access level and saving space at the same time. The stand is easy to assemble and features adjustable height and a super strong support arm to mount your gear on. Please check below for dimensions.

top plate dimensions: 12.75" W x 3.5" H x 14.5" D
pole height: 16"
bottom plate: 17.75" W x 18" D
top plate with extension & pole depth: 22"
reviewed by the mgmnt

file under:
all - digital djing / dj accessories / accessories - digital djing / odyssey dj gear / and more

go to detail page | close window

Odyssey
Medium Format Single CD Player Case (FZCDI)

heavy duty flight case for your CDJ

Odyssey's ATA Medium Format CD Player case features a slide-out front panel and extended area in the rear for easier cable access.

Fits CD players such as:

- American Audio CDI-300, CDI-500
- Gemini CDJ-01, CDJ-02, CFX-20, ICDJ, ICFX
- Numark Axis-4, Axis-9, ICDX
- Pioneer CDJ-200
- Pioneer CDJ-400
- Stanton S-250
- Vestax CDX-05
- Dennon DNS1000,1200

Lid interior height: 2.75"

Dimensions (exterior):
12"W x 9"H x 18"D

Dimensions (interior):
9.75"W x 3.25"H x 16-12.75"D
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Numark IDJ2 / Laptop Case (FZIDJ2)

custom flight case for IDJ2

Another addition to the Odyssey Flight Zone series made specifically to house the Numark IDJ2 IPOD mixing station. This case is built with enough room behind the IDJ2 to store cables and hard drives. There's also a pull out tray, a first ever for any Odyssey case design, for keyboards/accessories.


INTERIOR DIMENSIONS:
IDJ COMPARTMENT 15.5-6.5"W x 2.5"H x 12.5"D
CABLE WELL 14.25"W x 4"H x 3"D
DRAWER TRAY 13"W x 1.25"H x 7.5"D (pulls out up to 6.5")

* The thin foam strip on the bottom of the slide tray are there for shipping purposes only. Please remove after you load your gear.

Dimensions (exterior):
21.5"W x 8"H x 18"D

reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Standard Position Turntable Coffin for 12" Mixer (FZDJ12W)

This ATA Pro DJ console holds one 12" mixer, and two 1200 style turntables in Standard position. Foam padding keeps your equipment safe and secure during transport. Detachable lid included. Includes wheels for easy transport.
reviewed by the mgmnt

file under:
record bags + equipment cases / odyssey dj gear /

go to detail page | close window

Odyssey
Technics SL-1200 Faceplate - Silver (AFPSL1200SIL)

add shine to your turntable

Odyssey's stylish faceplate lends a brand new look to the any Technics SL1200 turntable. Not only does it offer protection, but it just makes your turntables have a brand new swag.

reviewed by the mgmnt

file under:
dj accessories / odyssey dj gear /

go to detail page | close window

Odyssey
Universal 12" Battle Tray (FZBB12)

set your mixer up between 2 cases

Odyssey's new 12" Battle Tray is perfect for setting up a mixer between two cases, raising the mixer surface to allow easier access and quicker moves. Essential for battle DJs using larger format mixers.

Dimensions (exterior):
14.5"W x 3.75"H x 19"D
reviewed by the mgmnt

file under:
dj accessories / odyssey dj gear /

go to detail page | close window