Skip to content
  1. 🚚 Free Shipping on Most US Orders over $99 info
  2. 🆕 50% Lower International Shipping Costs 🌐info
  3. 10% OFF 4️⃣ or MORE Records Every Day! details
  4. 🔴 Save On Audio Gear shop gear specials

TTL Setup: Audio-Technica AT-LP120X / Spinbase 2


Congratulations on your new TTL Setup! Here are detailed instructions on how to completely set up your Audio-Technica AT-LP120X / Spinbase 2 Package. 

1.0 SET UP YOUR SPINBASE 2


1.1

Unpack your Spinbase. Don't plug it in yet, you're going to need the access the back of the unit.

2.0 SET UP YOUR AT-LP120X TURNTABLE

Please refer to this quick video to get your AT-LP120X turntable set up. 

2.1 CONNECT YOUR TURNTABLE TO THE SPINBASE

  • Use the RCA cable that came with the turntable, plug it into the back of the turntable.
  • Attach the groundwire (the one with U-shaped ends) into the silver post and tighten the screw-down clamp.
  • IMPORTANT: make sure the switch is in the PHONO position, this turns OFF the turntable's preamp. You'll be using the Spinbase' preamp.
  • Attach the other end of the RCA / groundwire to the Spinbase.

3.0 PLUG IN POWER CABLES

  • Locate the turntable power supply (this may be tucked away in a small white box), and plug into your turntable. Plug in your Spinbase.
  • Now move your setup to its final position.

3.1 TURN ON YOUR SPINBASE

  • Press the large knob to power on the Spinbase.
  • Press the knob until it you see "Ph" (stands for "PHONO", and activates the Spinbase's preamp).
  • Tip: to turn off the Spinbase, press the knob for 3 seconds. You can also use the remote for these functions.

3.2 PLAY A RECORD!

  • Place the turntable on the record.
  • Take off the stylus guard on the cartridge.
  • Hit the play button and place the needle on the groove.
  • You shoud hear output. If you don't, make sure the volume is turned up and the Spinbase is set to "Ph".
  • If the volume remains low / distorted make sure the switch on the back of the turntable is set to "PHONO" and the groundwire is connected on both sides.

4.0 UPGRADES (SOLD SEPARATELY)

4.1

Consider our AT-LP120X Turntable Upgrade Kit which includes the AT618a Disc Stabilizer (which improves sound quality by reducing vibrations) and the AT-VMN95EN nude diamond stylus (which is easily installed and provides clearer sound accuracy than the stock stylus). 

4.2

Turntable Lab: Triple Operation Brush ($25) - The Carbon Fiber brush that your setup is great for everyday usage (we use one in our office). However, our new Triple Operation brush is on another level in terms of effectiveness with dual cleaning pads plus an integrated carbon fiber brush.